Peugeot 108 Rocker Arms

Almost always a collapsed hydraulic lash adjuster not holding oil pressure, usually because oil level is low or the oil is past its service interval. On 1.6 THP engines we see worn follower pads too — often a sign of neglected servicing rather than a design fault.

Parts and labour depend on the engine — a full rocker set swap on a 1.6 THP is a much bigger job than a single ticking adjuster on a 1.4 petrol. Request a free quote through our form with your engine code for an accurate parts and fitting estimate.

AfricaBoyz lists Peugeot 206 1.4 rocker arms from around R150 to R250 depending on condition. A full set for the engine works out cheaper per unit. Send us your engine code and we'll match OEM-equivalent parts rather than generic aftermarket.

Persistent ticking from the top of the engine, rough idle, loss of power and sometimes a misfire code on a specific cylinder. Pull the rocker cover and you'll often see one rocker sitting at a different height or with a polished groove on its pad.

Yes, and it's the most common root cause. Hydraulic adjusters need oil pressure to maintain valve clearance — without it they collapse and the rocker hammers the valve. Check level weekly and change oil every 10,000km with the correct PSA-spec grade.