Open: 8:00AM - 5:00PM | Sat: 8:30AM - 12:30PM
In Stock

Peugeot 206 Rocker Arms

Aftermarket rocker arms engineered to slot into the Peugeot 206. Cross-referenced against OEM specs and dispatched countrywide from our warehouse

Speak to a Specialist
Fitment-Verified Components
Dispatched in 24-48 Hours
Peugeot-Trained Team
Aftermarket Guarantee
Rocker Arms for Peugeot 206

What Are Peugeot 206 Rocker Arms?

Rocker arms are the pivoting levers that transfer camshaft motion to the valves, with hydraulic lash adjusters on most modern Peugeots.

Signs You Need New Rocker Arms

Ticking or tapping from the top of the engine
Noise worse at cold start, quietens as oil warms
Rough idle or misfire under load
Low engine oil pressure warning
Check engine light with misfire or VVT codes
Visible wear on the rocker pad when valve cover off

Common Questions About Peugeot 206 Rocker Arms

What causes rocker arm ticking in a Peugeot engine?

Almost always a collapsed hydraulic lash adjuster not holding oil pressure, usually because oil level is low or the oil is past its service interval.

How much does it cost to replace a Peugeot rocker arm?

Parts and labour depend on the engine — a full rocker set swap on a 1.6 THP is a much bigger job than a single ticking adjuster on a 1.4 petrol. Request a free quote through our form with your engine code for an accurate parts quote.

How much is a Peugeot 206 rocker arm in South Africa?

Peugeot 206 1.4 rocker arms run from around R150 to R250 depending on condition through our supplier network. A full set for the engine works out cheaper per unit. Send us your engine code and we'll match OEM-equivalent parts rather than generic aftermarket.

What are the symptoms of a failing rocker arm?

Persistent ticking from the top of the engine, rough idle, loss of power and sometimes a misfire code on a specific cylinder. Pull the rocker cover and you'll often see one rocker sitting at a different height or with a polished groove on its pad.

Can low oil pressure damage Peugeot rocker arms?

Yes, and it's the most common root cause. Hydraulic adjusters need oil pressure to maintain valve clearance — without it they collapse and the rocker hammers the valve. Check level weekly and change oil every 10,000km with the correct PSA-spec grade.

Not Sure Which Rocker Arms Fits Your 206?

Share your VIN or engine code and our Peugeot team will cross-check the correct rocker arms for your exact 206 variant.

Chat with Our Parts Desk